Main » Screen Retrofitting for Tensioned Screens
Screen Retrofitting for Tensioned Screens
When the particle size distribution and clay content change depending on the mining horizon, or when the company's product goals change, string or harp screens may be required. In such cases, upgrading the vibrating screen allows the required production parameters to be achieved.
When the level of mesh clogging reaches critical values, especially when working with wet or clayey materials, screening efficiency drops significantly. Installing screens with tensioning hooks, such as harp screens, can significantly improve the self-cleaning process and, as a result, increase productivity.
Vibrating screens with a wedge-type screen fastening system have drawbacks, and proper operation requires additional fastening of the mesh to the screen supports using hooks and other methods. Improper installation can lead to whipping of the screen, which in turn causes premature failure.
Also, as a rule, such vibrating screens have one large screen installed per deck, for example, 4.5 x 1.75 m. In the event of abrasive wear of the mesh at the loading points, the entire screen has to be replaced. To avoid this problem, the vibrating screen can be retrofitted to a tensioning system and the deck can be divided into several screens. This allows replacing only the damaged screen and using combinations of screens with different openings on one deck, which helps achieve the required particle size distribution.
Stages of Work
Upon initial contact, we request the manufacturer's technical documentation and drawings of the vibrating screen with overall dimensions. After analyzing the data and performing calculations, we send a commercial proposal
In the event of concluding a contract for the provision of vibrating screen retrofitting services, our engineering and service department begins developing design documentation (screens, clamping bars, rubber profile, required types of work on the vibrating screen, such as welding and drilling)
In accordance with the developed design documentation, we manufacture screens and a complete kit for retrofitting the vibrating screen. You can retrofit the vibrating screen yourself if you have the necessary skills. If required, our specialists are ready to come to your site to perform installation, commissioning, and adjustment of the equipment
With proper retrofitting of the vibrating screen, you increase productivity and the quality of finished materials and, most importantly, ensure a long service life of the screen, thereby saving your budget